Ch-tech Active Module Carrier VX402C-64 Manual do Utilizador descarregar pdf

Rev. A

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012

(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com

Mechanical:

• Mates with VXI, VME, and VME64

rear connectors

• VXI shielding provided

• Occupies one slot in a VXIbus C-

size mainframe

• Slot in front panel allows

extension of VME P2 signals to

front panel (cable not included)

VXI Power Consumption:

+5V 300 mA (max)*

-5.2V 100 mA (max)

-2V 10 mA (max)

±12V 0

±24V 0*

* Does not include power required

by installed module or +3.3V

power converter

+3.3V/+5V VME64 Supply:

• -0001 version provides up to 34W

for the combination of +3.3V and

+5V power

• -0002 version provides up to 34W

of +5V power (no +3.3V power

supplied)

• -0003 & -0004 versions provide

up to 34W of +5V power and up to

21W of +3.3V power

VXIbus Compliance

Complies with VXIbus Spec.

Rev. 1.4 for single-slot C-size

modules and with the VMEbus

Spec. ANSI/IEEE STD 1014-1987,

IEC 821 and IEC 822.

Addressing: A32/A24/A16

Data Transfers: D32/D16 Slave

Interrupts: Supported

Triggers: Supported

Applications

• VXI A or B-size to VXI C-size

• VME module to VXI chassis

• +3.3V supply to VME64 module

Ordering Information

Part Number: 11028500-xxxx

-0001 3.3V supplied from VXI +5V

-0002 without 3.3V supply

-0003 3.3V supplied from VXI -24V

-0004 3.3V supplied from VXI +24V

Additional Information

User Manuals for C&H carriers and

this module can be found on our

website at www.chtech.com.

Specifications:

Electrical:

• Active logic allows compliance

with VME/VXIbus driving and

loading specifications

• Provides VME64 +3.3V power

and grounds (except -0002)

• All VXI power supplies are fused

• Provides direct access to the front

panel I/O connections

• Provides buffered data, address,

interrupt, and trigger lines (ECL

and TTL)

• Includes direct SUMBUS

connections and a prototyping

area

• Pass-through connectors allow

the VME P2 connector to be

connected or isolated from the

VXI P2 backplane

Temperature:

Operating: 0°C to 50°C

Storage: -40°C to 70°C

VX402C-64

Active Module

Carrier

The VX402C-64 allows a 3U or 6U

VME, VXI (A or B), or VME64

module to be used in a C-size VXI

mainframe chassis. The carrier

provides an actively buffered

electrical interface for the standard

bus signals. The carrier does not

support the full VME64 extension

bus; however, some versions

provide +3.3V power to the P1

Row D VME64 connector. The

carrier and its enclosure have been

designed so that the front panel of

the VME module sits flush with the

front panels of other C-size

modules.

(VXI top shield included,

but not shown in picture)

Resumo do Conteúdo

Página 1

Rev. AC&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012(512) 733-2621 • FAX (512) 733-2629 • www.chtech.comMechanical

Comentários a estes Manuais

Sem comentários

Ch-tech Active Module Carrier VX402C-64 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Para o carro Ch-tech Active Module Carrier VX402C-64. CH Tech Active Module Carrier VX402C-64 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais